(574) 862-4453

Forming

Metal Forming Services in Indiana

Southwest Welding press brake operator checking a formed part

Forming is where a flat piece of metal becomes a part. It's also where precision requirements get stress-tested. A bend that's off by a degree or a radius that doesn't match spec creates problems that are difficult and expensive to fix once the part moves downstream. Southwest Welding handles forming in-house, which means we control the tolerances, the process, and the result.

Forming capabilities

What We Form and How We Form It

Operator at the Schröder motorized folder

Folding

Southwest Welding runs a folder for sheet metal forming: panels, enclosures, and components that require consistent, clean bends along long edges.

Equipment: Schröder SPB Evolution Motorized Folder. Handles up to 12-foot lengths in up to 7-gauge material.

A row of press brakes on the Southwest Welding shop floor

Press Brake Bending

Our press brakes handle everything from light sheet parts to heavy structural bends. With a range of machines on the floor, we match each job to the right brake, so the bend is consistent from the first part to the last.

Equipment: Eight press brakes ranging from 35 to 400 tons

Southwest Welding fabricator handling a formed auger flight

Flight Forming

Southwest Welding operates a flight twister, that’s a specialized machine for producing the helical or spiral profiles used in augers and industrial applications. If your part requires twisted fin geometry, we can handle it in-house at production volume.

Application example: Mixer fins for concrete barrels.

Specs: Handles up to 3/4" thick material. Capable of custom pitch and internal and external taper.

Equipment: 8.3 Metric Ton Advanced Spiral Technology SuperTyro

Roll Forming

Equipment: 2 Roll Formers. Maximum rolling width of 8 feet. Handles material up to 3/8" thick mild steel. Minimum rolling diameter of 12".

Why it matters

One Shop. Every Bend.

Most forming problems come from the gap between the person who cut the flat blank and the person who bends it. When those are two different shops, specification details get lost in translation. A bend radius that works fine on paper can create fitup problems when it meets the weld fixture.

At Southwest Welding, forming follows cutting in the same facility. The people bending your parts are working from the same drawings as the people who cut them. Adjustments happen fast, corrections happen before the part is welded, and every angle in every production run is held to the same standard.

Request a quote

Ready for a Fabricating Partner?